[MNAPRS] How do I conmnect using UI-View?

[Blosberg, Dean]

Jerry, 

Short answer is to use 	WIDE2-2 for fixed stations and WIDE1-1,WIDE2-1
for mobiles.

Not all of the local digipeaters have adopted the new paradigm, a lot of
digipeaters in Minnesota are still using the old RELAY, WIDE type which
causes a lot of extra traffic.  Doug N0NAS would know the current status
of MN digis better than I. Wisconsin has for the most part switched
over.

Take a look at http://eng.usna.navy.mil/~bruninga/aprs/fix14439.html for
a good explanation of why the new is better and what settings to use. 

Dean
N0HOY at arrl.net
Interested in helping with the 2007 MS150 bike tour? Drop me a note!

-----Original Message-----
From: mnaprs-bounces at lists.twinslan.org
[mailto:mnaprs-bounces at lists.twinslan.org] On Behalf Of Jerry W
Sent: Monday, August 21, 2006 1:46 PM
To: MNAPRS
Subject: [MNAPRS] How do I conmnect using UI-View?

I have UI-View and have used that for ISS and PCSAT digipeaters.  What
do I put in the box "unproto address" for the twin city area
digipeaters?

Are there any web sites for Minnesota APRS, I had http://www.mnaprs.org/
but that seems to be off?

TIA,

Jerry W - K0HZI
_______________________________________________
MNAPRS mailing list
Post msgs to MNAPRS at lists.twinslan.org
Sub/Unsub at http://lists.twinslan.org/twinslan/listinfo/mnaprs